Welcome to Island Pools
The solution to running your pool.
The solution to running your pool. Softer water, no chlorine aroma, perfect for Spas, Hotels, Schools and Leisure clubs - as well as 25 and 50 meter pools.
Developed, trialled and thoroughly tested over 4 years by engineer and company founder Richard Morrison, Island Pools’ water cleaning system is the only one on the market to clean swimming pool / Spa water to EU standards without the need to purchase or store conventional disinfection chemicals such as chlorine.
The philosophy behind the company is ecologically driven. The amount of chemicals used to control commercial pools is far beyond what most people think. Our aim – to reduce the use of these harsh chemicals, AND produce a better swimming environment – whilst reducing a Health and Safety risk.
We have managed to produce a system of disinfection in swimming pools, without the need to purchase any chemicals.
The system developed by Island Pool Systems has been aimed at public pools in the EU where the law dictates specific limits for water chloramines (cause of Red eye & irritation).
Our system development was driven by observing the distress caused ( red eye, reactions, and lack of clarity in pools) This is due to the imbalance of harmful chemicals injected into pools without accurate control.
There had to be a solution to create a better swimming pool environment without swimming in a chemical soup.
How it works
The system deploys a closed loop cell and colorimetric analysis, enabling pool operators to monitor pool water remotely around the clock, thus maintaining optimal water quality in public and commercial swimming pools, spas and Jacuzzis.
The Island Pools E-System has other clear advantages over existing pool water treatment methods. These include lower energy consumption when treating comparable volumes of water, more convenient maintenance regimes, and of course water that is odour-free and doesn’t cause ‘red eye’. It becomes very child friendly.
- Imagine your pool with no manual chlorine dosing.
- Your staff will not be dealing with volatile chemicals
- You will no longer need to store bulk chemicals
- Less backwashing – and energy used to reheat.
- Online recording of water quality data
What our System does
Sampling and chemical analysis
The system takes water samples at regular time intervals and performs high precision analysis to determine chlorine, chloramine, pH and salinity levels.
Automatic results analysis
The measured levels are stored and timestamped in the process computer. They are compared with the pre-set points. The results are used to fine tune the process.
Chlorine concentration control
The chlorine concentration adjustments are made by salt electrolysis utilising Titanium plates in a special cell.
The pH level is controlled by dosing acid agents (CO2 or HCl) in the pool water. The required amount is computed and released by the process computer.
Two methods are used for chloramine control: breakpoint chlorination method; chlorine shock dosing (mainly in pools with high chloramine levels due to heavily bathing load and used by children)
The process computer is network connected allowing for real time parameter monitoring, reports and graphs and event alerts.
Who can use the system?
We offer solutions for
Local Authority pools
Community Trust pools
Investment and trade enquiries
Island Pools Ltd Southbank
Isle of Wight